power saw banner

sharpen your own saw blades


 

 

 

Buying and using your saw can be confusing. We found all the bext information about Tables Saws, Circular Saws, Jig Saws, Radial Arm Saws, Chain Saws, Reciprocating Saws, Scroll Saws, any kind of power saw!
This site lists the best places on the web to find information and links on sharpen your own saw blades .

 

NorthernTool Home Page 2

Fix Up Houses and Make a $Bundle$

"How I made $200,000 in
2 Years Fixing Up Houses
Part Time"

Try it Risk Free! If you don't like the book after 90 days, keep it for FREE!

power saw book
Main Jigsaw Tablesaw

 

 

Building a Wood Ladder  
by Dave Markel

This is a simple project that should only take a couple of hours to complete.

Supplies:
You will need
2 - 12' 2x4's (uprights)
2 - 8' 2x3's (rungs)
Exterior wood glue
36 - 2-1/2" Deck Screws

Tools:
4 Clamps
Measuring Tape
Square
Pencil
Circular Saw
Drill with countersink and screw bit
Hammer
Chisel

Start by clamping the two 12' - 2x4's together with the top edge and ends flush. Stand them on edge. The rungs are notched into the 2x4 upright 1-1/8" so we need to mark out notches. The top and bottom rungs are 8" from the ends, place a mark at 8". This is the top of the upper rung and the bottom of the lower one. Offset these marks 2-1/2" (the width of the 2x3 rungs).

Now measure out for the rest of the rungs. Lay your tape measure on the 8" mark made earlier and measure 16" increments. These marks represent the center of the intermediate rungs. Offset these marks 1-1/4" on either side.

Using your square, square off the marks you have just made down the face of the 2x4 uprights 1-1/8" deep. Square your marks across the top edge of the uprights as well.

Now it is time to cut the notches. Set the depth of your circular saw to 1-1/8". Start by making the cheek cuts of the notch then proceed to make a series of cuts about a 1/4" apart through the rest of the notch. Do this for all the notches.

Before removing the clamps use your hammer to break out the wood in the notches and clean up each notch with your chisel.

Unclamp the two uprights and set them aside. Now cut all the 2x3's into 19" lengths. You will get 5 out of each 2x3 but since we will only need 9 rungs you will have 1 extra. Each rung is attached to the upright with exterior wood glue and deck screws. You will need to drill two countersinks on each end of the rung (so 4 per rung).

Now attach them to the uprights starting with the top and bottom rung. You might need to use your hammer to "convince" the rungs into the notch. Don't force them into the notch if it too tight. They should only need to be tapped in not beat to pieces.

Put some of the exterior wood glue into both notches and insert a rung. Make sure the rung in flush to the outside of the uprights. Secure in place with 4 deck screws (2 on each end). Continue this for the reminder of the rungs.

Protect you ladder with a durable finish like paint or stain.

About the Author
Visit Sage Brush Wood Working for more great articles about wood working.
http://www.all-wood-working-plans.com/wood-working-articles.html

 


Power Tip
Untitled Document Always wear safety goggles and a dust mask when operating a power saw. The saw dust from presssure treated lumber is especially dangerous when inhaled.

 

1. Seriously Good: January 2005
... stainless steel (too hard to sharpen in my opinion) and it was too ... when I saw the TV chefs began using santoku blades I was ... that meant I had to bake my own. Brilliant, eh? So I started ...
http://seriouslygood.kdwe ...uslygood_archive.html


2. Brill Luxus 38 push manual reel mower
... you wonít have to sharpen for 5 to 8 years or ... Flame hardened steel blades ñ harder than ... the morning. My neighbor saw that my lawn was cut ... product, or write your own. Have you considered a ...
http://www.cleanairmowing.com/brillux38ree.html


3. Makita M101 Facts
... two reciprocating saw blades for wood and metal, a ... to merely 'sharpen' the saw; we need to throw it ... pick up a power tool." Sharpen all you want: you may ... can apply this to their own life. Or you could ...
http://www.tools-and-powe ...info/makita-m101.html


4. The Air grinder with cylindrical grinders and used rotary grinders
... tree stumps make your own belt grinder give me ... grinder how to sharpen drill bits with a ... silver pepper grinders blades for angle grinders ... tig grinder carbide saw grinder centerless ...
http://air-grinder.waferer.com/


5. Saw - A Great Resource of Information
... Miter Saws Delta Table Saws Jet Table Saw Saw Trailer Table Saw Sled Chain Saw Bear Sharpen Your Own Saw Blades Coping Saw Power Saws Saw Palmetto Berry The Saw Mk Tile Saw Brick Saw Mcculloch Chain ...
http://www.sawdepot.com/


6. Ask The Nuge
... Blade. I fletch my own arrows so I need to ... to line up with the blades or up and down with ... the best. Be sure to sharpen the hell out of em ... muzzleloader season we saw about 17 does and about ...
http://www.tnugent.com/ask_nuge.shtml


7. Sharpening Equipment Chain Saw Sparpening
... For Lawn Mower Blades Sharpening Equipment ... grinders can also sharpen depth gauges an raker ... BTJG20641 Sharpening saw chain has never been ... Sharpener for your own chain or to sharpen ...
http://www.foleybelsaw.com/page10.html


8. The Electrode grinder with home meat grinders and glass grinder
... pizza %26 grinders. blades for angle grinders ... weed grinder chain saw grinder tig grinder ... grinder how to sharpen drill bits with a ... safety signs make your own belt grinder sewage ...
http://electrode-grinder.waferer.com/


9. eHow.com - Garden and Lawn Care - Learn from our How-to Guide
... Make Deer Repellant Make Your Own Nontoxic Pesticides Make a ... Garden Art as a Gift Buy a Chain Saw Buy a Garden Hose Buy a Lawn ... Pruning Clippers Sharpen Push Mower Blades Sharpen a Hand Mower ...
http://www.ehow.com/list_1053.html


10. The Internal grinder with husqvarna stump grinder and espresso grinders
... grinders how to sharpen drill bits with a ... cheese grinder chain saw grinder cider press ... pussy grinder make your own belt grinder home trash ... graves coffee grinder blades for angle grinders ...
http://internal-grinder.waferer.com/


11. The Belt grinder with horizontal grinders and die grinder
... knife making grinders blades for angle grinders ... brush grinders. Chain saw grinder cheese grinder ... accessories how to sharpen drill bits with a ... stone grinder make your own belt grinder pictures ...
http://belt-grinder.waferer.com/


12. Kevin Kelly -- Cool Tools
... over time. You can't sharpen the helical blades of ... cut the stalks. The blades are thicker and not ... Nobi Telescopic Pruning Saw $98 Hida Tool Posted on ... Garden Growing your own exotic fruits These ...
http://www.kk.org/cooltoo ...hives/cat_gardens.php


13. Exotic Siberian Cat Breeder of Siberian Kittens
... be near normal cats, who own siberians (usually 2 or ... absolutely LOVE to sharpen and work their claws ... cat... and than first saw a beautiful long haired ... hair on the shoulder blades and lower part of the ...
http://www.siberian-cat-b ...m/why_a_siberian.html


14. White Grass Report
... lot where they can sharpen their blades and paint their faces ... in fine spirits and holding our own as we navigate the busy times ... Ontario to Hudson Bay...! Saw some tundra terrain that looked ...
http://www.whitegrass.com/report.html


15. The Coffee grinders with angle grinders and belt grinder
... grinder kit, make your own belt grinder angle ... instructions. How to sharpen drill bits with a ... surface grinder chain saw grinder bunn coffee ... blacksmith grinder. Blades for angle grinders ...
http://coffee-grinders.waferer.com/


16. Ed Storch: Information Page
... press for forge welding and my own handmade grinders and forges ... I made my first knife (from a saw blade and axe handle) at the ... all my blades for edge geometry and edge holding, and sharpen all ...
http://www.storchknives.com/info.htm


17. ►► Outdoor Living :: Landscaping Tools
... a metal impeller. Toro's own 51598 model is only 20 ... tools; Stainless steel blades; durable, hardwood ... was some sort of Buzz-Saw-Like blade on the end ... 2020) push mowers; Sharpen mower blades with ...
http://garden.whiteline.p ...archcat=OutdoorLiving


18. Farberware 14-Piece Classic Forged Block Set here
... block Precision taper ground blades made of heavy-gauge high ... knife set I have ever own. I had to sharpen them as soon as I ... with this set. My brother saw them at my house, used them and ...
http://www.kitchen-zone.c ...orged__B0001GZO7W.htm


19. GerberGear > FAQ
... returns in transit. Q: I own a Gerber knife with a ... would be used to "sharpen" a dull blade. Q: Why ... cutting ability. Spare blades for most of our saws ... A: Maintaining your saw, pruner, spade, etc is ...
http://www.gerbergear.com/faq.php


20. The Die grinder with meat grinders and valve grinder
... grinders how to sharpen drill bits with a ... angle grinders chain saw grinder stump grinders ... used tub grinders blades for angle grinders ... coffee grinder make your own belt grinder rotary ...
http://die-grinder.waferer.com/


21. Guide for Protecting Workers from Woodworking Hazards
... Also, saw blades often move so fast that it can be difficult to determine whether they are moving. This is especially a problem under fluorescent lighting Rotating and Reciprocating Movements All ...
http://www.osha.gov/Publi ...hazards/osha3157.html


22. MadYes | saw blades
... blades chop saw blades tct saw blades lenox band saw blades oldham saw blades wood band saw blades sharpen your own saw blades cold saw blades buzz saw blades lenox saw blades 4000 alloy steel saw ...
http://www.madyes.com/catalog/saw-blades.htm


23. The Valiant Company Survival Golok
... it is advisable to sharpen them, even before ... deal by sharpening their own blades. You will learn ... my enthusiasm for the blades. There is the subject ... tool is vital, since a saw is limited. One has the ...
http://www.oldjimbo.com/survival/valiant1.html


24. The Home meat grinders with plain cylindrical grinder and wheat grinder
... floor grinder how to sharpen drill bits with a ... grinder .com make your own belt grinder, ammco ... nut grinder chain saw grinder used grain ... air grinder left hand blades for angle grinders ...
http://home-meat-grinders.waferer.com/


25. Bandsaw Sawmill Blades / Bandmill Blades by Wood-Mizer
... including our very own CBN grinder, and ... equipment to re-sharpen blades, providing you ... compared to blades sharpened elsewhere ... consumer. Sawyers can saw more lumber faster ...
http://www.woodmizer.com/en/blades/index.aspx


26. Guitar Builder Basic Tools
... ll need to get some blades to go with it). SWS ... are dozens of ways to sharpen your tools, but we ... tail) file Exacto-knife/saw Hand drill These lists ... a whole subject of their own, and since we do not ...
http://www.lmii.com/CartTwo/Basictools.asp


27. Bamboo Planing Forms and Rodmaking Tools
... to taste, so you can broach your own quad ferrules with corners as ... A2 differs from their normal blades by the additon of some ... how to sharpen not only your plane irons but also saw blades ...
http://www.wagnerrods.com/tools.html


28. Old muscle cars
... willa ford band saw blades rooms for rent long ... real estate agents sharpen chain saw asbestos ... the magazine people the saw doctors old muscle cars ... Homers Musicke droue own cause. place between ...
http://old-muscle-cars.ateba.opole.pl/


29. The Red Final - Aberdeen Football Club
... feud brought about by his own performances at Pittodrie in ... lane A Saturday night in April saw some Dandies realise an ... to the sword. So let's sharpen our blades and get after them ...
http://www.redfinal.com/


Jokes Funny Funny
You need a break! A good laugh is the best medicine. So stop skating and skatboarding for a few minutes and find the best daily online jokes!
http://www.jokesfunnyfunny.com/

Only Drills!
The largest selection of information about drills, power drills, cordless crills, pneumatic drills, drill bits, and boring machines.
http://www.OnlyDrills.com

Sewing Patterns
Find the latest fashion and sewing patterns for all seasons. Fabric, patterns, threads, and more.
http://www.sewwhatpatterns.com

saw movie review
saw horses
mk diamond tile saw
saw blade sharpener
free scroll saw plans
echo chain saw parts
dewalt table saw
band saw wheel
what the butler saw
chain saw sharpener
parts poulan chain saw
chain saw wolf
band saw mills
band saw review
carbide saw blades
mk diamond saw blade
delta saws
reciprocating saws
miter saw reviews
skill saw
tile saw stands
ceramic tile saw blades
wet saw blades
bi metal saw blades
mk brick saw
Recent news about sharpen your own saw blades
AsktheBuilder.com
Discover Sweet Home Improvement Skills

Cork Flooring Planks
Cork flooring planks can create a great, long-lasting floor. Installed properly and protected with clear urethane, cork flooring will stand up to your heavy-traffic areas. Discount cork flooring might not be a bargain. Natural cork flooring comes in different hardness.
Painting Steps
Knowing how to paint steps properly will make your painted steps last longer and show less signs of wear. Painting steps with a stencil requires preparation, the proper paint for steps and a sealing coat, such as clear water-based urethane
Bathroom Tubs
A reader has questions about bathroom tubs and a bathroom tub fixture. In a debate with his wife, the reader wants to clear up issues with bathroom soaking tubs and a bathroom garden tub. What happened to the standard bathtub?
Steel Beams
Steel I beams can be used on residential construction. However a steel beam design might require special handling. Structural steel beams are heavier then wooden beams. Consider the cost of special cranes and steel beam prices when using steel beams.
Select Snowblowers Video
Tim Carter walks you through how to select the best snowblower for you. He points out all the trade-offs and features that you can help you narrow the many snowblowers on the market.
Pool Room Floor
How do you convert a pool room into a regular room? Not that kind of pool room. A room with an actual swimming pool in the room.
Tile Grout Cleaning
When it comes to tile & grout cleaning, there is an easier way to clean tile grout. Knowing how to clean tile grout this method will save you hard scrubbing and your ceramic tiles will look brand new.
Vessel Sink
A vessel sink can add character to your bathroom. There are certain features to check before installing bathroom vessel sinks. Even an old pot can make a great copper vessel.
Vinyl Siding Replacement
Vinyl siding replacement is very expensive.  Try cleaning vinyl siding with a spray and wipe vinyl siding cleaner. This could restore the look of your vinyl siding without all the expense.
Lumber Drying
Lumber drying is accomplished in a lumber drying kiln. Kiln dried lumber has reduced moisture content, but the dried lumber does not reach 0% moisture.
Building Collapse
What happens a hole is dug too close to a building's foundation? Here is an example of a building collapse due to several factors. A structural collapse can occur when the pressures on opposite sides of a building occur. Excavation, rain and structure defects all can contribute to a real problem.

Septic Cleaning
If your house has a septic tank, regular septic cleaning needs to be part of your schedule. Putting wrong materials into your septic system will create septic tank problems. Get a septic system inspection to be sure your septic system is being properly maintained.
Framing Square
There are many uses for an aluminum framing square. Many carpenters use a roof framing square to layout roof rafters. A carpenter framing square is also useful when building stairs.
Ceramic Fireplace Tile
Installing ceramic fireplaces tiles to mimic a vintage tile look can take some research. You will have to visit specialty tile stores to find the right fireplace ceramic tiles for achieve your desired look. But your work will pay off with great looking vintage fireplace tiles.
Loretto Staircase
The Loretto Staircase is surrounded by an air of mystery - who built it and why is it still standing. But the Loretto Chapel Miracle Staircase is subject to the same laws of physics as any staircase or circular staircase.


Newsfeed display by CaRP

 

 

 

| Privacy Policy |  Our Other Sites

just-bibles.com | the-pastry-chef.com | coffee-tea-shop.com | power saw info | bible-art-audio.com | bible-shoppe.com